Complete kit provides everything necessary to mount a scope the correct way, including an instructional DVD. Proper scope installation is critical to the accuracy of your firearm. Get the most accuracy possible out of your gun by ensuring proper scope installation. The Wheeler Alignment Bars, Lapping Bars and Lapping Compound allow you to achieve the perfect fit between scope and rings. Securing Fasteners properly is critical to accuracy as well. Precisely controlled torque along with thread locking compound will keep your scope held securely in place. Professional grade bits and the F.A.T. Wrench are the perfect combination to properly secure fasteners without deformation.
Color: Gloss Black
Weaver Steel Lock Mounts allow you to adjust the eye relief on your favorite scope. These solid, all-steel rings allow you to move your scope forward or back for optimum placement. Two straps and four screws provide added gripping power for these lightweight, all-aluminum rings. Thumbscrews allow for quick detach. Weaver rings can handle any scope-mounting need. Whether you're looking for our classic Weaver's original cross-lock Top Mount, windage adjustable or dovetail extension rings; we have many great options. These rings are available in a variety of choices including aircraft-grade aluminum options or Grand Slam steel, and many more. The ring straps are supposed to come in contact with the lower mount during tightening. You should alternate tightening a little at a time and to tighten no more than 20in/ibs. There will be a gap of approximately 1/16â€ on both sides of the straps. If you tightened just one side at a time then one side of the ring straps would be tight to the lower mount and the other side would have approximately 1/4 inch gap on just one side. The gap needs to be equal on both sides. And if that is not the case then it probably needs 30MM rings.
Brass Stacker MN9130SSM Scout Scope Mount for Mosin Nagant Rifles, Black
Manufacturer: Brass Stacker
Brand: Brass Stacker
The See Thru Scout Scope Mount for Mosin Nagant M9130 rifles chambered in 7.62x54r allows you to "Scope your Mosin" while preserving its historic integrity. Mount and MIL-STD-1913 Picatinny rail are rigid steel construction with black oxide finish and bolt securely over rear sight block. Any scope on any mount that receives an impact (dropped, hit, etc.) should not be trusted to be accurate. This product provides ability to use original open sights if mount/scope have been compromised. Mount is designed for use with rear sight blocks that have TWO pins (not the sight leaf pivot pin) passing through the top edge of barrel. These pin holes are often located inconsistently as a result of original manufacturing process. They are frequently not parallel and may be skewed. Occasionally, the block itself, as it sits on the barrel dovetail underneath, can be out of alignment with the bore axis. This condition, if extreme, can adversely affect how Mount sits. Mount will accommodate a front to back (horizontal) pin center distance of 1.39" (35.3mm) to 1.82" (46.7mm) and allows for .039" (1mm) of up and down (vertical) movement. It is designed for blocks measuring between .750"(19.05mm) and .787"(20.00mm) wide. We have made every reasonable effort to ensure that our Mount will work with the vast majority of M9130's. This mount will NOT work for M38, M44 or T53's. Scope and rings are not provided. Made in America with a 100% Lifetime Warranty.
SNIPERÂ® Tactical Picatinny/Weaver Integral Double Slot 1" Scope Ring Mount
Product Specifications:Rings Material Aircraft Aluminum Profile High Diameter 1" Saddle Height 22mm Ring Width 20mm No. of Top Screws 6 Base Length 84mm Ring Spacing 55 Style CantileverHeight: 2.48 IN Width: 2.01 IN Length: 5.35 IN Weight: 6.1 OZ