SNIPERÂ® Rail Mount Adapter, Mount Adjustor, Dovetail to Picatinny
Heavy Duty Airgun/.22 to Picatinny/Weaver Rail Adaptor, 9 Slots in 3 7/8 Length With this mount, you can use your weaver based scopes, lasers, flashlights and other accessories on your dovetail based items.
Manufacturer: Sportsman Supply Inc.
Technological advances in today's modern firearms, ammunition and optics have enhanced the potential for long range accuracy. However, precision mounting and alignment of your system's scope is critical to realizing the accuracy. A scope's reticle must be precisely aligned with the weapon to ensure holdover or turret adjustments for bullet drop produce true vertical compensation for point of impact. If the crosshairs are canted left or right both elevation and windage bullet impact error will occur. The Wheeler Professional Reticle Leveling System is a precision tool and technique designed to allow a scope to be perfectly leveled on any firearm with ease. CNC machining, factory adjusted calibration set screws, anodized aluminum construction and protective molded case put this instrument in a class of its own. The system is comprised of two machined aluminum level housings calibrated to their integrated levels. The Barrel Clamp Level is attached to the guns barrel while the smaller Reference Level is placed on scope base, bottom half of a ring or other flat surface perpendicular to the vertical axis of the gun. The gun is then rotated until the Reference Level is aligned. The tuning adjustment knob on the Barrel Clamp Level is then turned until its level is centered to match the Reference Level. At this point the Barrel Clamp Level is calibrated to the guns axis. The Scope can be installed loosely and the Reference Level placed on top of the scopes turret cap. The scope is rotated until the Reference Level is aligned with the Barrel Clamp Level and then simply secured in place. The Wheeler PRLS is the most effective instrument available for precision scope alignment.
The Mildot Master is an analog calculator designed along the principle of a slide rule, utilizing logarithmic and inverse logarithmic scales developed specifically for performing the following operations: Rapid and simple calculation of range to target, based on a measurement of the target with a mildot reticle, by aligning the estimated target size directly opposite the mildot measurement, and then reading the range at an index mark. Rapid and simple calculation of the amount of sight correction necessary to compensate for bullet drop and/or wind drift for a given range, enabling the shooter to determine either the equivalent telescopic sight adjustment (minute-of-angle, or MOA) or the equivalent hold-over (mils), by reading equivalents in both MOA and mils directly opposite the bullet drop/wind drift figure. Additionally, angle of fire for uphill or downhill shots can be accurately measured, and the up/down compensation can be closely calculated to reduce the errors such shots can induce.
Tapco Intrafuse AK/SKS Military Grade Windage and Elevation Sight Tool
Manufacturer: A.C. Kerman - LE
Designed on request by military services deployed overseas, our wind age and elevation sight tool is the strongest on the market today.Â Manufactured from 4140 steel, this tool is as rugged as the weapon it was designed to work on.Â Easily make adjustments to all AK and SKS variants. Marked TAPCO USA and stamped with our CAGE Code 3E2Q7.
Vortex Optics Riflescope Lens Flip Cap Cover Size 5, 40 to 46mm (1.6 to 1.8")Outside Diameter
Manufacturer: Vortex Optics
Brand: Vortex Optics
Simple but effective rifle scope accessory by Vortex Protects ocular or objective lens from damage and debris Simple installation Durable rubber construction Hinged design flips completely back and lies flat when not in use
XS Sight Systems SW-0024S-3 Big Dot Tritium Express Front Sight with S&W M&P Shield
Manufacturer: Green Supply
Brand: XS Sight Systems
Color: Matte Black
High-visibility sight combinations put you on target faster in high stress or low light conditions by pulling your eyes to the front sight. Sight set includes non-tritium, white line V-notch for the rear sight, green tritium dot surrounded by a white ring for the front. Low profile, no-snag design is great for carry and combat competition guns. Matched sight sets offer direct replacement of factory sights. Big Dot (BD) front sight has a large, easy-to-see white ring surrounding the tritium dot. Airlite Ti replaces pinned front sight on fixed sight guns, requires drilling for pin. Specifications: - Fits: Smith & Wesson M&P Shield - Sight Color: Green, Green/White - Style: Dot - Finish: Matte Black.
Vortex Cantilever Ring Mount for 30mm Tube, 2in Offset CM-202
Manufacturer: Vortex Optics
Brand: Vortex Optics
Offset scope mount for effective rifle scope mounting to flat top Rifles Forward-oriented offset mount configuration allows proper head position and eye relief when using Rifle scope Cantilevered for ideal weight distribution and mount orientation Designed for 30mm scopes and telescopic sights Built from sturdy aluminum